Meopta MeoPro R6 1-6x24 SFP RD – Fast Driven Hunt and Dynamic Shooting Scope with Wide Field of View
If you want to shoot accurately, your scope must match the situation.
The Meopta MeoPro R6 1-6x24 SFP RD is not just any rifle scope, but a deliberately designed solution for driven hunts, dynamic hunting, fast targets, and short to medium distances. The magnification is not the only decisive factor – it's how the image, reticle, parallax, and point of impact work together in real-world use.
With 1–6x, a 24 mm objective, and a second focal plane (SFP), this scope is designed for maximum speed, a wide field of view, and 6x reserve – with comprehensible mechanics, clear reticle logic, and precise point of impact control.
Why this particular product?
✔ 1–6x magnification range – useful for maximum speed, wide field of view, and 6x reserve
✔ 24 mm objective – designed for daylight, quick target acquisition, and low weight
✔ 2nd focal plane (SFP) – SFP is absolutely suitable here, as the reticle remains consistently clear during fast shots
✔ Click logic: One click corresponds to 1.5 cm at 100 m, 3 cm at 200 m, and 4.5 cm at 300 m
✔ Meopta's typical robust, nitrogen-filled, and weather-resistant construction
✔ Very wide field of view of approx. 36.5 m / 100 m at 1x
✔ Short design for handy firearms
Why MeoPro R6 1-6x24 SFP RD?
This model makes sense if you don't just want the largest possible scope, but a rifle scope that cleanly covers your actual shooting range.
- You get a clear classification of distances instead of mere data sheet values
- You can consciously choose a reticle suitable for the application
- You immediately understand what a click practically does when zeroing in
- You get optics that combine hunting practice and controlled training
- You avoid bad purchases because magnification, objective size, and focal plane match the application
The difference to a wrongly chosen rifle scope:
❌ Too much magnification: narrow field of view, slow aiming, unnecessary weight
❌ Too small objective: less reserve at dusk and high magnification
✔ MeoPro R6 1-6x24 SFP RD: maximum speed, wide field of view, and 6x reserve with suitable optical and mechanical reserve
Precisely this difference is not apparent in the store – but when zeroing in, at dusk, and under time pressure.
Practical Tip: Cleanly document zero, clicks, and point of impact
One click corresponds to 1.5 cm at 100 m, 3 cm at 200 m, and 4.5 cm at 300 m. After zeroing in, always write down: ammunition, zeroing distance, approximate temperature, click position, and magnification used.
This way, you can immediately identify later whether a deviation is due to the ammunition, mounting, parallax, shooting stance, or truly the scope.
Most Important Features
- Magnification range: 1–6x
- Objective diameter: 24 mm
- Main tube: 30 mm
- Reticle: 4C, K-Dot 2, or BDC 3
- Reticle plane: 2nd focal plane (SFP)
- Click adjustment: 1.5 cm / 100 m
- Parallax: hunting preset
- Robust, weather-resistant construction for hunting and training
- Sensibly usable with clean mounting and controlled zeroing
- Very wide field of view of approx. 36.5 m / 100 m at 1x
- Short design for handy firearms
- Illuminated reticle for quick target acquisition
Our Assessment
The MeoPro R6 1-6x24 SFP RD excels where maximum speed, a wide field of view, and 6x reserve are required. It is not a random scope for everything, but must be consciously matched to the weapon, mounting, ammunition, and hunting ground.
The combination of 1–6x and 24 mm is crucial in practice: the lower magnification is about overview and speed, the higher magnification about target assessment, control, and precise work.
SFP is absolutely suitable here, because the reticle remains consistently clear during fast shots. This reticle logic determines whether you just aim – or can truly use holdovers, corrections, and distances cleanly.
Suitable for
-
Hunters: if your hunting ground requires driven hunting, dynamic hunting, fast targets, and short to medium distances
-
Sport shooters: if you want to use point of impact, clicks, and reticle reproducibly
-
Stand hunting / field / range: if you need more control than with a pure all-round scope
-
Users planning attachments or accessories: if mounting height, overall length, and parallax need to be considered
Why specifically for you?
If you want to know why your shot hits or misses, you need a scope that works predictably. This model gives you precisely this technical foundation – provided that mounting, zero, and shooting technique are correct.
You can also find suitable optics, mounts, and accessories in our category Outdoor & Crisis Preparedness.
Important note:
Rifle scopes improve target acquisition and precision, but do not replace safe weapon handling, clean shooting technique, or legal review of the intended use.
Always check mounting, point of impact, and ammunition used before hunting.
Magnification & Objective – what does that mean in practice?
1–6x doesn't automatically mean "better," but describes your usable working range. The low magnification determines the field of view and speed, the high magnification determines target control and precision.
The 24 mm objective is primarily relevant for light reserve and image stability. The higher the magnification, the smaller the exit pupil – which is why a suitable objective size is important, especially at dusk and high magnification.
- Low magnification: faster acquisition, better peripheral vision
- High magnification: control impact pattern, assess target more accurately
- 24 mm: more reserve in poor light and at higher magnification
- Always check at the shooting range at which magnification you truly shoot stably
Reticle & Focal Plane – Correct Use
This model works with a 2nd focal plane (SFP). SFP is absolutely suitable here, as the reticle remains consistently clear during fast shots.
Important: A reticle is only an advantage if you know at which magnification or in which plane your holdover points are correct.
- Choose 4C, K-Dot 2, or BDC 3 consciously according to application
- 4C/Z-Plex: fast, clean, intuitively suitable for hunting
- BDC/MRAD/MilDot: useful if you actively use ranges, holdovers, and ballistics
- Do not set the illuminated reticle too brightly – otherwise the holdover point will overexpose at dusk
Clicks, Zero & Point of Impact
One click corresponds to 1.5 cm at 100 m, 3 cm at 200 m, and 4.5 cm at 300 m. This is extremely important when zeroing in, because you don't have to guess, but can calculate the correction precisely.
After every mounting change, every ring change, or ammunition change, a control group belongs on the shooting range. Especially with hunting optics, trust in the point of impact is more important than any advertising claim.
- Zero cleanly at a defined distance
- Document click position after zeroing in
- Shoot a control group after mounting work
- Consciously adjust parallax at high magnification
- Never use a single hit as a reference
Features & Construction / Contents
- A rifle scope of this class thrives on clean mounting, correct torque, and stress-free ring position
- Nitrogen filling and weather-resistant construction support use in rain, cold, and temperature changes
- Coated lenses reduce disruptive influences from water, dirt, and reflections
- The technical performance only becomes visible when ammunition, mounting, and shooter work reproducibly
Technical Data
- Magnification: 1–6x
- Objective diameter: 24 mm
- Main tube diameter: 30 mm
- Length: 256 mm
- Weight: 628 g
- Field of view at 100 m: 36.5 – 6.3 m
- Adjustment increment: 1.5 cm / 100 m
- Elevation adjustment range: 349 cm / 100 m
- Eye relief: 100 mm
- Reticle plane: 2nd focal plane
- Objective thread: M26.5x0.75
Scope of Delivery
- Meopta MeoPro R6 1-6x24 RD
- Throw Lever
- Protective caps
- Instruction manual
FAQ
For what distance is this scope suitable?
That depends on the hunting ground, weapon, and ammunition. The 1–6x magnification range makes it particularly suitable for maximum speed, a wide field of view, and 6x reserve; however, a clean zero and realistically trained distances remain crucial.
What does click adjustment mean in practice?
One click corresponds to 1.5 cm at 100 m, 3 cm at 200 m, and 4.5 cm at 300 m. This allows you to precisely correct impact point deviations when zeroing in, instead of adjusting by feel.
Is high magnification always better?
No. High magnification shows more details, but makes aiming errors, mirage, and parallax errors more visible. In practice, the highest magnification is not automatically the best shooting magnification.
When do I need parallax compensation?
As soon as you work with higher magnification or at varying distances. Incorrectly set parallax can cause point of impact errors, even if the reticle and target appear to be perfectly aligned.
What should I check after mounting?
Ring mounting, eye relief, horizontal alignment, torque settings, parallax, zero, and a control group with the ammunition actually used.
Especially in the field of driven hunt rifle scopes, stand hunting optics, and precise point of impact, it is not a single data value that is decisive, but the interplay of magnification, objective, reticle, zero, and reproducible mounting.
