Meopta MeoPro R6 4.5-27x50 RD – Distance and Ranging Scope for Field Hunting and Precise Training
If you want to shoot accurately, your scope must match the situation.
The Meopta MeoPro R6 4.5-27x50 RD is not just any riflescope, but a deliberately designed solution for field hunting, long-range training, and precise shots at medium to long distances. What matters is not just the magnification – but how the image, reticle, parallax, and point of impact work together in real-world use.
With 4.5–27x, a 50 mm objective lens, and considering the SFP/reticle logic depending on the variant, this scope is designed for high magnification and clear correction work – with reproducible mechanics, clear reticle logic, and precise point of impact control.
Why exactly this product?
✔ 4.5–27x magnification range – useful for high magnification and clear correction work
✔ 50 mm objective lens – good balance of detail reserve and still portable objective size
✔ Note SFP/reticle logic depending on variant – MRAD 1 RD is intended for holding and correction work; 4C remains clearer and simpler for hunting
✔ Click logic: One click corresponds to approx. 0.7 cm at 100 m, 1.4 cm at 200 m, and 2.1 cm at 300 m
✔ Meopta's typical robust, nitrogen-filled, and weather-resistant construction
✔ 27x maximum magnification
✔ MRAD 1 RD variant for precise corrections
Why the MeoPro R6 4.5-27x50 RD?
This model makes sense if you don't just want the biggest possible scope, but a riflescope that cleanly covers your actual shooting range.
- You get a clear classification of distances instead of mere datasheet values
- You can consciously choose your reticle to suit the application
- You immediately understand what a click practically does when zeroing in
- You get optics that combine hunting practice and controlled training
- You avoid bad purchases because magnification, objective size, and image plane fit the application
The difference to a wrongly chosen riflescope:
❌ Too much magnification: narrow field of view, slow target acquisition, unnecessary weight
❌ Too small an objective lens: less reserve at dusk and high magnification
✔ MeoPro R6 4.5-27x50 RD: high magnification and clear correction work with suitable optical and mechanical reserve
Precisely this difference is not apparent in the shop – but when zeroing in, at dusk, and under time pressure.
Practical tip: Document zero, clicks, and point of impact cleanly
One click corresponds to approx. 0.7 cm at 100 m, 1.4 cm at 200 m, and 2.1 cm at 300 m. After zeroing, always note down: ammunition, zeroing distance, rough temperature, click position, and magnification used.
This way, you can immediately tell later whether a deviation is due to the ammunition, mounting, parallax, shooting stance, or really the scope.
Most important features
- Magnification range: 4.5–27x
- Objective lens diameter: 50 mm
- Main tube: 30 mm
- Reticle: 4C or MRAD 1 RD
- Reticle plane: Note SFP/reticle logic depending on variant
- Click adjustment: 0.7 cm / 100 m
- Parallax: Parallax compensation available
- Robust, weather-resistant construction for hunting and training
- Useful with clean mounting and controlled zeroing
- 27x maximum magnification
- MRAD 1 RD variant for precise corrections
- Elevation adjustment range 244 cm / 100 m
Our assessment
The MeoPro R6 4.5-27x50 RD plays to its strengths where high magnification and clear correction work are required. It is not a random scope for everything, but must be consciously matched to the weapon, mounting, ammunition, and hunting ground.
The combination of 4.5–27x and 50 mm is crucial in practice: the lower end is about overview and speed, the upper end about target assessment, control, and precise work.
MRAD 1 RD is intended for holding and correction work; 4C remains clearer and simpler for hunting. Precisely this reticle logic determines whether you just aim – or can truly use holdovers, corrections, and distances cleanly.
Suitable for
-
Hunters: if your hunting ground requires field hunting, long-range training, and precise shots at medium to long distances
-
Sport shooters: if you want to use point of impact, clicks, and reticle reproducibly
-
Stand / Field / Range: if you need more control than with a pure all-round scope
-
Users planning for attachments or accessories: if mounting height, overall length, and parallax need to be considered
Why exactly for you?
If you want to know why your shot hits or misses, you need a scope that works predictably. This model gives you exactly this technical basis – provided mounting, zero, and shooting technique are correct.
Suitable optics, mounts, and accessories can also be found in our Outdoor & Emergency Preparedness category.
Important note:
Riflescopes improve target acquisition and precision, but do not replace safe weapon handling, clean shooting technique, or legal review of the intended use.
Always check mounting, point of impact, and ammunition used before hunting.
Magnification & Objective Lens – what does it practically bring?
4.5–27x does not automatically mean "better," but describes your usable working range. The low magnification determines the field of view and speed, the high magnification determines target control and precision.
The 50 mm objective lens is primarily relevant for light reserve and image stability. The higher you magnify, the smaller the exit pupil becomes – that's why a suitable objective size is especially important at dusk and high magnification.
- Low magnification: faster acquisition, more peripheral vision
- High magnification: control impact pattern, assess target more accurately
- 50 mm: more reserve in low light and higher magnification
- Always check at the range at which magnification you really shoot stably
Reticle & Image Plane – using it correctly
This model works with SFP/reticle logic depending on the variant. MRAD 1 RD is intended for holding and correction work; 4C remains clearer and simpler for hunting.
Important: A reticle is only an advantage if you know at which magnification or in which plane your holdover marks are correct.
- Choose 4C or MRAD 1 RD consciously based on application
- 4C/Z-Plex: fast, clean, intuitively suitable for hunting
- BDC/MRAD/MilDot: useful if you actively use ranges, holdovers, and ballistics
- Do not set illuminated reticle too bright – otherwise, the aiming point will overexpose at dusk
Clicks, Zero & Point of Impact
One click corresponds to approx. 0.7 cm at 100 m, 1.4 cm at 200 m, and 2.1 cm at 300 m. This is extremely important when zeroing in because you don't have to guess, but can calculate the correction accurately.
After every mounting change, ring change, or ammunition change, a control group belongs on the range. Especially with hunting optics, trust in the point of impact is more important than any advertising claim.
- Zero cleanly at a defined distance
- Document click position after zeroing
- Shoot a control group after mounting work
- Consciously adjust parallax at high magnification
- Never use only a single hit as a reference
Features & Construction / Contents
- A riflescope of this class relies on clean mounting, correct torque, and stress-free ring position
- Nitrogen filling and weather-resistant construction support use in rain, cold, and temperature fluctuations
- Coated lenses reduce disturbing influences from water, dirt, and reflections
- The technical performance only becomes visible when ammunition, mounting, and shooter work reproducibly
Technical Data
- Magnification: 4.5–27x
- Objective lens diameter: 50 mm
- Main tube diameter: 30 mm
- Length: 361 mm
- Weight: 935 g
- Field of view at 100 m: 7.3 – 1.2 m
- Adjustment step: 0.7 cm / 100 m
- Elevation adjustment range: 244 cm / 100 m
- Eye relief: 100 – 98 mm
- Objective thread: M55x0.75
Scope of Delivery
- Meopta MeoPro R6 4.5-27x50 RD
- Throw Lever
- Protective caps
- Instruction manual
FAQ
For what distance is this scope suitable?
That depends on the hunting ground, weapon, and ammunition. The magnification range of 4.5–27x makes it particularly suitable for high magnification and clear correction work; however, a clean zero and realistically trained distances remain crucial.
What does click adjustment mean in practice?
One click corresponds to approx. 0.7 cm at 100 m, 1.4 cm at 200 m, and 2.1 cm at 300 m. This allows you to precisely correct point of impact deviations when zeroing in, instead of adjusting by feel.
Is high magnification always better?
No. High magnification shows more details, but makes aiming errors, mirage, and parallax errors more visible. In practice, the highest magnification is not automatically the best shooting magnification.
When do I need parallax compensation?
As soon as you work with higher magnification or at varying distances. Incorrectly adjusted parallax can cause point of impact errors, even though the reticle and target appear to be perfectly aligned.
What should I check after mounting?
Ring mounting, eye relief, horizontal alignment, torque values, parallax, zero, and a control group with the actually used ammunition.
Especially in the field of distance scopes, stand optics, and precise point of impact, not a single data value, but the interplay of magnification, objective lens, reticle, zero, and reproducible mounting is decisive.
